The New PL Series - Advanced Linear regulated Laboratory DC Power Supplies

Single output PL-P units include non-isolated analog voltage control of voltage and current using a 0V to 5V or 0V to 10V signal.

Analog control outputs are also incorporated to enable easy parallel connection of multiple units in a master-slave configuration.

A terminal for remote on/off control is also provided. This can be operated using a TTL/CMOS control signal, or using a relay.

Single output units can be connected together in a parallel configuration by connecting Vout and Iout on the Master unit to CV and CC on the Slave units.

Thus, for example, four PL155-P power supplies could be parallel connected to provide currents up to 20 amps.