|
From time to time TTi makes updates to
the firmware of the digital bus interface available. This firmware resides in Flash RAM and may
be updated using the USB interface.
Depending in the age of a QPX1200 it may
be wholly or partially firmware updateable. There are 4 distinct
hardware versions as detailed below.
Version 1.xx These units report a single
firmware revision on the display during start-up "1.xx" and have
RS232 and USB interfaces only. These units are not updateable. Version 2.xx These units report a single
firmware revision on the display during start-up "2.xx" and have
RS232 and USB interfaces only. There is also a position for a
LAN connection but this has been blanked off. These units are
not updateable. Version 3.xx These units report two firmware
revisions on the display during start-up "3.xx -- y.yy" where
3.xx is the main firmware and y.yy is the firmware for the
interface board.These units have LAN, RS232 and USB interfaces.
The main firmware is not updateable but the interface board
firmware is.
The latest firmware version for the
interface (y.yy) is 2.03. Version 4.xx These units report two firmware
revisions on the display during start-up "4.xx -- y.yy" where
4.xx is the main firmware and y.yy is the firmware for the
interface board. These units have LAN, RS232 and USB interfaces
and may also have GPIB as a factory option. These units can be
recognised by there firmware revision and because these units
have a "V/A" function selectable by pressing shift-8. The
firmware in all boards is updatable using a single file.
The latest firmware versions are: main 4.04
and interface 2.03. |
