|
High Resolution LCD
The 3.6" (90mm) diagonal panel uses 256 x 112
pixels and provides a large amount of simultaneous
information.
System connection information is
shown on the top line. Below that is a general status
screen showing five major parameters. These parameters
change depending upon the function being used.
Below the status information is the
main editing line which shows the parameter currently
under control.
Representative Waveform Display The
area the to right of the status section shows a
representation of the current waveform.
This is more than just a fixed
display for each waveform, it is calculated from the
waveform parameters and gives a live indication when
values such as symmetry, rise time or pulse width are changed.
Modulation waveforms and
representations of the modulated carrier are shown
simultaneously. Burst count waveforms are also shown
graphically.
Soft Key Control
Six soft keys below the display
provide access and control of the parameters for each
function.
All numeric parameters can be set
directly from the numeric keypad, or can be incremented
using the spin wheel.
The currently selected waveform and
major functions are also indicated by illumination of
the respective keys. Read
More ... |
